» Ultra-High-Transparency Switchable Film 1

Ultra-High-Transparency Switchable Film 1

Appearance and Performance
The appearance of the switchable film product must exhibit uniform color, haze, and light transmission. The conductive film and the PDLC material must be firmly bonded, with no signs of delamination. The interior of the product must be free from voids (areas lacking PDLC), streaks, spots, creases, black specks, dust, debris, or electrical breakdown points. The surface of the product must be free from scratches, sharp protrusions or indentations, and any indelible colored stains.

Optoelectronic Properties
Switchable film is driven by alternating current (AC). It is colorless and transparent when powered on, and becomes translucent (hazy) when powered off.

Mechanical Properties
Prepare a 200 × 50 mm specimen of the switchable film. Place it in a tensile testing machine and peel apart the two conductive film layers at a 180° angle at a constant speed, while measuring the tensile force required for the peeling process. The tensile force must be ≥ 0.3 Kgf.

Visual Inspection
Place the prepared PDLC (polymer-dispersed liquid crystal) film flat on an inspection table with a transparent glass surface. Position an LED light source 50 cm below the table surface to illuminate the film, and evaluate its visual characteristics in both the “off” (opaque) and “on” (transparent) states.

Physical Measurement
Switchable film is manufactured in rolls, with each roll of ITO-conductive film serving as a single production batch. For each batch, a 500 mm long strip (spanning the full width of the film) is sampled from the beginning, middle, and end of the production run. From each of these strips, smaller 200 × 300 mm specimens are cut—one each from the left, center, and right sections—to be tested for thickness, optoelectronic properties, and mechanical properties.

Labeling
The exterior of the packaging bears a product label indicating the product name, specifications, quantity, and date of manufacture. Inside the packaging, a detailed product information sheet is included, covering the product name, model, specifications and quantity, date of manufacture, and inspection date.

Storage, Precautions, and Shelf Life
Storage Conditions: The switchable film should be stored in a well-ventilated, dry environment at a temperature of 25±10°C and a relative humidity below 70%. Keep away from heat sources. During storage, the film must not come into contact with acidic or alkaline gases and liquids, nor with organic gases and liquids; it must also be kept dry and protected from exposure to water or immersion.
Shelf Life: Six years (for indoor use).
Precautions: 1. Handle the switchable film with care. When moving large sheets, ensure they are not bent or folded.
2. The edges and corners of the switchable film can be sharp; please handle with caution to avoid injury to your hands.


Post time: 11 月-16-2026
请在浏览器中启用JavaScript来完成此表单。